LytArmor® Bravo Ballistic Panel – 4' × 8'

Rigid UHMWPE ballistic wall panels in a 4' × 8' stock sheet, built for concealed protection inside framed walls. Choose Bravo I for UL 752 Levels 1, 2, 3 & 6 at only 0.20" thick, or Bravo II for rifle-rated UL 752 Levels 4, 7 & 8. Both cut with a standard table saw and fasten with drywall screws. Price includes shipping.

Serious ballistic protection, without the weight and thickness of traditional ballistic wall materials.

LytArmor® Bravo is a rigid ballistic panel from Action Bullet Resistant, manufactured from Ultra-High Molecular Weight Polyethylene (UHMWPE) unidirectional composite with a protective PE coating. It is designed for concealed protection inside framed wall assemblies, and ships as a 48" × 96" (4' × 8') stock panel covering 32 square feet.

The series comes in two levels. Bravo I is handgun-rated, covering UL 752 Levels 1, 2, 3 & 6 plus NIJ HG2 / III-A at only 0.20" thick and about 30.4 lbs per panel. Bravo II is rifle-rated, covering UL 752 Levels 4, 7 & 8 plus NIJ RF1 and NIJ Level III at 0.73" thick. Both cut with a standard table saw, fasten with sheetrock screws, and can be custom cut by Action Bullet Resistant before shipping.

Protection levels

Both levels share the same material, stock size and installation method. Choose the level your project requires:

Bravo I

One panel. Multiple tested threat levels.

LytArmor® Bravo I is an ultra-lightweight UHMWPE ballistic panel engineered for concealed ballistic wall protection. A single Bravo I panel construction provides tested protection for UL 752 Levels 1, 2, 3 & 6, along with NIJ HG2 / III-A performance.

At only 0.20" thick and approximately 0.95 lb./ft², a stock 4' × 8' panel weighs approximately 30.4 lbs., providing lightweight, multi-hit ballistic protection without the weight and thickness associated with traditional ballistic wall materials.

Coverage: 32 sq. ft.

Thickness: 0.20" (5.2 mm)

Approx. Weight: 30.4 lbs. per panel

Material: UHMWPE Composite

Tested Protection: UL 752 Levels 1, 2, 3 & 6 | NIJ HG2 / III-A

Multi-Hit Capability: Excellent

The published specification identifies the construction as UHMWPE unidirectional composite with a PE coating, 5.2 mm nominal thickness, approximately 0.95 lb./ft² areal density, rigid construction, excellent UV resistance and less than 0.9% humidity absorption.

Bravo II

The LytArmor® Bravo II Ballistic Panel from Action Bullet Resistant is a lightweight, rigid ballistic panel engineered for high-threat protection. Manufactured from Ultra-High Molecular Weight Polyethylene (UHMWPE), Bravo II delivers serious ballistic performance while dramatically reducing the weight and thickness associated with many traditional ballistic materials.

LytArmor Bravo II provides protection for UL 752 Levels 4, 7, and 8, as well as NIJ 0101.07 Level RF1 and NIJ 0108.01 Level III.

At approximately 0.73 inches thick and only 3.68 lb/ft², Bravo II is an excellent solution for ballistic walls, safe rooms, security enclosures, government facilities, banks, courthouses, law enforcement facilities, and other applications where high-level ballistic protection is required.

UL 752 Levels 4, 7 & 8 Ballistic Protection

LytArmor Bravo II is designed for higher-level ballistic threats. Its published ballistic performance includes protection against:

• 7.62 x 51 mm M80 Ball – 147 grain
• 5.56 x 45 mm M193 / .223 – 56 grain
• 7.62 x 39 mm MSC – 123 grain

In addition to UL 752 Levels 4, 7, and 8, Bravo II carries NIJ 0101.07 Level RF1 and NIJ 0108.01 Level III protection ratings.

This combination makes LytArmor Bravo II an excellent choice when rifle-rated ballistic protection is required without the excessive weight of many traditional ballistic panel systems.

Lightweight UHMWPE Ballistic Construction

LytArmor Bravo II is manufactured using UHMWPE unidirectional fabric with a PE plastic coating.

The result is a rigid, flat ballistic panel that combines high-level protection with an exceptionally low weight of approximately 3.68 lb/ft².

For a standard 4' x 8' sheet, that equates to approximately 118 pounds per panel based on the published areal density.

Reducing panel weight can make material handling, fabrication, and installation easier while also reducing the additional load placed on walls, framing, floors, and surrounding construction.

Specifications

Bravo I

Bravo II

Product: LytArmor® Bravo II Ballistic Panel

Product Code: PAVB8M

Panel Size: 48" x 96" (4' x 8')

Panel Type: Rigid, flat ballistic panel

Material: Ultra-High Molecular Weight Polyethylene (UHMWPE)

Construction: Unidirectional fabric with PE plastic coating

Nominal Thickness: 18.5 ± 0.7 mm / 0.73 ± 0.05"

Areal Density: 18.0 kg/m² / 3.68 lb/ft²

UL 752 Ratings: Levels 4, 7 & 8

NIJ Rating: 0101.07 Level RF1

NIJ Rating: 0108.01 Level III

UV Resistance: Excellent

Humidity Absorption: Less than 0.9%

Standard 4' x 8' Ballistic Panel

This eStore listing is for one 48" x 96" (4' x 8') LytArmor Bravo II Ballistic Panel.

Additional panel sizes are available, and custom sizes can be cut by Action Bullet Resistant prior to shipping.

Need a specific size? Contact us with your required dimensions and we can provide custom-cut panels for your project.

Applications

Bravo II

LytArmor Bravo II can be incorporated into a wide variety of ballistic-resistant construction and security applications, including:

• Ballistic wall systems
• Safe rooms
• Security offices
• Banks and financial institutions
• Government buildings
• Courthouses
• Law enforcement facilities
• Public safety facilities
• Guard booths
• Security enclosures
• Ballistic partitions
• Protective counters and desks
• Fortified structures
• Vehicle protection

Its combination of high-level ballistic protection, low weight, and thin construction also makes Bravo II an excellent option for retrofit projects where adding excessive weight or wall thickness may not be practical.

Easy to Cut and Fabricate

One of the advantages of LytArmor ballistic panels is their ease of fabrication.

LytArmor Bravo II can be cut using a standard table saw, allowing panels to be sized in the field for project-specific conditions.

Don't want to cut the panels yourself? Action Bullet Resistant can custom-cut your panels prior to shipping.

Simple Mechanical Fastening

LytArmor Bravo II panels can be fastened using standard sheetrock screws, making them easy to incorporate into many wall and protective construction assemblies.

Proper fastening and panel layout are important to ensure the ballistic material remains securely positioned throughout the protected area.

Protecting Panel Seams

Yes, seams between ballistic panels should be protected.

We highly recommend using 6-inch-wide LytArmor ballistic batten strips to overlap panel seams. The overlap helps maintain continuous ballistic protection between adjacent panels and eliminates an otherwise vulnerable line in the protective barrier.

Openings, penetrations, edges, and transitions should also be addressed so the ballistic protection remains continuous throughout the protected area.

LytArmor vs. Fiberglass Ballistic Panels

Traditional fiberglass ballistic panels are manufactured using layers of resin-reinforced fiberglass. They have been used for years in ballistic wall construction and can provide effective protection. However, as ballistic protection levels increase, fiberglass panels can become significantly heavier and thicker.

LytArmor takes a different approach.

LytArmor uses advanced UHMWPE ballistic material to achieve high-level ballistic protection at substantially lower weight.

LytArmor Bravo II weighs approximately 3.68 lb/ft² and is only approximately 0.73 inches thick.

That reduced weight and thickness can make a major difference when designing ballistic walls, safe rooms, guard booths, security enclosures, and retrofit applications. Lighter panels can be easier to handle and fabricate while placing less additional weight on the surrounding structure.

Complete Ballistic Protection

A ballistic panel is only one part of a properly protected space. Doors, windows, glazing, transaction systems, seams, penetrations, and other openings should also be considered when creating a complete ballistic-resistant envelope.

Action Bullet Resistant manufactures complete ballistic systems, including aluminum, steel, and wood ballistic doors; fixed and operable ballistic windows; storefronts; curtain walls; transaction systems; ballistic wall panels; and custom protective systems.

When you're protecting people, every part of the system matters.

LytArmor® Bravo II — High-Level Protection Without the High-Level Weight

When your project requires rifle-rated ballistic protection but weight and thickness matter, LytArmor Bravo II Ballistic Panels provide a lightweight alternative to traditional ballistic wall materials.

Lightweight. Thin. Powerful.

You only have one chance to protect what matters.

Contact Action Bullet for installation and care guidance for this product.

What is LytArmor® Bravo?

Bravo I

LytArmor® Bravo I is a lightweight ballistic-resistant panel manufactured from Ultra-High Molecular Weight Polyethylene (UHMWPE). It is designed for concealed ballistic protection within wall assemblies while providing an extremely lightweight and thin alternative to traditional ballistic panels.

Bravo II

LytArmor Bravo II is a lightweight, rigid ballistic panel manufactured from Ultra-High Molecular Weight Polyethylene (UHMWPE). It is designed to provide high-level ballistic protection while reducing the weight and thickness associated with many traditional ballistic panel materials.

What UL 752 levels does LytArmor® Bravo protect against?

Bravo I

LytArmor® Bravo I is one panel construction tested to provide ballistic protection for UL 752 Levels 1, 2, 3 & 6. It also provides NIJ HG2 / III-A protection.

Do I need to select a ballistic protection level when ordering?

Yes — choose the level above before adding to cart. Each level is a single panel construction covering several tested threats, so there is nothing further to select: the handgun-rated level covers its UL 752 levels and the rifle-rated level covers its own. If you are not sure which level your project requires, call us on 800-962-8088.

What size is the stock LytArmor® Bravo panel?

Bravo I

Our standard stock panel is 48" × 96" (4' × 8'), providing 32 square feet of coverage per panel.

Bravo II

This listing is for one 4' x 8' (48" x 96") LytArmor Bravo II ballistic panel. Other sizes and custom-cut panels are available upon request.

How thick is LytArmor® Bravo?

Bravo I

LytArmor® Bravo I is approximately 0.20" (5.2 mm) thick.

Bravo II

LytArmor Bravo II has a nominal thickness of approximately 0.73 inches (18.5 mm).

How much does a 4' × 8' LytArmor® Bravo panel weigh?

Bravo I

A standard 4' × 8' LytArmor® Bravo I panel weighs approximately 30.4 lbs., or approximately 0.95 lb. per square foot.

What is LytArmor® Bravo made from?

LytArmor® Bravo I is manufactured from Ultra-High Molecular Weight Polyethylene (UHMWPE) unidirectional composite material with a protective PE coating.

Is LytArmor® Bravo multi-hit capable?

Bravo I

Yes. LytArmor® Bravo I provides excellent multi-hit ballistic capability.

How do I cut LytArmor® Bravo panels?

Bravo I

LytArmor® Bravo I can be easily field cut using a standard table saw. If you prefer, Action Bullet Resistant can custom cut your panels to the required dimensions prior to shipping.

Bravo II

LytArmor Bravo II can be cut using a standard table saw. Action Bullet Resistant can also cut custom sizes prior to shipping if you provide us with the required dimensions.

How do you fasten LytArmor® Bravo panels?

Bravo I

LytArmor® Bravo I panels can be fastened directly to the supporting wall framing using standard drywall (sheetrock) screws.

Bravo II

LytArmor Bravo II panels can be fastened using standard sheetrock screws. Panels should be securely fastened to the supporting construction while maintaining continuous ballistic coverage.

Do I need to cover the seams between LytArmor® panels?

Bravo I

Yes. We highly recommend covering all panel seams. Use 6" wide LytArmor® batten strips to overlap adjoining panel seams and help maintain continuous ballistic protection throughout the wall assembly.

Bravo II

Yes. We highly recommend using 6-inch-wide LytArmor ballistic batten strips to overlap and protect the seams between panels. Properly protecting the seams helps maintain continuous ballistic protection throughout the wall system.

Can LytArmor® Bravo be installed behind drywall?

Bravo I

Yes. LytArmor® Bravo I is designed for concealed installation within framed wall assemblies and can be installed behind standard drywall and other interior wall finishes.

Can LytArmor® Bravo be used with ballistic doors, windows and glazing?

Bravo I

Yes. LytArmor® Bravo I can be incorporated with ballistic doors, windows, storefronts and glazing systems to create a more complete ballistic-resistant building envelope.

Are custom-size LytArmor® Bravo panels available?

Bravo I

Yes. In addition to our standard 4' × 8' stock panels, Action Bullet Resistant can custom cut LytArmor® panels to your required dimensions prior to shipping.

Can Action Bullet Resistant help determine how many panels I need?

Bravo I

Yes. Send us your wall dimensions or project drawings and our team can help determine the number of LytArmor® Bravo I panels and 6" batten strips required for your project.

Where is LytArmor® Bravo commonly used?

Bravo I

LytArmor® Bravo I is ideal for schools, government buildings, courthouses, corporate offices, police and public-safety facilities, safe rooms, security offices, reception areas, transaction areas and other facilities requiring ballistic wall protection.

Why choose LytArmor® Bravo?

Bravo I

LytArmor® Bravo I provides a unique combination of light weight, minimal thickness, multi-hit capability and multiple tested ballistic threat levels. At approximately 0.95 lb. per square foot and only 0.20" thick, Bravo I makes adding ballistic protection easier without the excessive weight and thickness associated with traditional ballistic wall materials.

What is the difference between fiberglass ballistic panels and LytArmor® ballistic panels?

Bravo I

The biggest differences are weight and thickness. Traditional fiberglass ballistic panels can be heavy and difficult to handle, especially as ballistic protection levels increase. LytArmor® uses advanced UHMWPE composite technology to provide ballistic protection in a significantly lighter and thinner panel.

For example, LytArmor® Bravo I is only approximately 0.20" thick and 0.95 lb. per square foot, making a standard 4' × 8' panel approximately 30.4 lbs.

The reduced weight can make LytArmor® easier to handle, cut and install while also reducing the additional load placed on the wall structure. LytArmor® also offers excellent multi-hit capability and can be cut using standard woodworking equipment.

Less weight. Less thickness. Serious ballistic protection.

lytarmor-bravo-i-ballistic-panel-4x8.jpg

LytArmor Bravo I 4x8 lightweight UHMWPE ballistic wall panel

LytArmor Bravo I Lightweight Ballistic Panel

LytArmor® Bravo I lightweight UHMWPE ballistic panel – 4' × 8'

lytarmor-bravo-i-thin-ballistic-panel.jpg

LytArmor Bravo I 0.20 inch lightweight ballistic panel thickness

lytarmor-bravo-i-ballistic-wall-installation.jpg

LytArmor Bravo I concealed ballistic wall panel installation

Bravo II

Traditional fiberglass ballistic panels use layers of resin-reinforced fiberglass to provide ballistic protection. As the required ballistic protection level increases, fiberglass panels can become significantly heavier and thicker.

LytArmor uses advanced UHMWPE ballistic material, allowing it to provide high-level ballistic protection at substantially less weight. LytArmor Bravo II weighs approximately 3.68 lb/ft² and is approximately 0.73 inches thick, making it an excellent option when weight, thickness, handling, and installation are important considerations.

What ballistic protection does LytArmor Bravo provide?

Bravo II

LytArmor Bravo II provides ballistic protection for UL 752 Levels 4, 7, and 8, as well as NIJ 0101.07 Level RF1 and NIJ 0108.01 Level III.

How much does LytArmor Bravo weigh?

Bravo II

LytArmor Bravo II weighs approximately 3.68 lb/ft². A standard 4' x 8' panel weighs approximately 118 pounds based on its published areal density.

Can LytArmor Bravo be used for ballistic walls?

Bravo II

Yes. LytArmor Bravo II is designed for use in ballistic wall systems, partitions, security enclosures, safe rooms, guard booths, counters, and other protective assemblies.

Can LytArmor Bravo be used for a safe room?

Bravo II

Yes. LytArmor Bravo II can be incorporated into a properly designed ballistic safe room. The walls, doors, windows, seams, penetrations, and other components should all provide the appropriate level of protection for the intended threat.

Can LytArmor Bravo be installed behind drywall or other finishes?

Bravo II

Yes. LytArmor Bravo II can be incorporated into a wall assembly and covered with architectural finish materials. The ballistic panel creates the protective layer while the finished wall can maintain the appearance of a standard interior space.

Can you provide custom-size LytArmor panels?

Bravo II

Yes. Action Bullet Resistant can provide custom-cut LytArmor Bravo II panels. Send us your required dimensions, and we can cut the panels prior to shipping.

Are other LytArmor protection levels available?

Bravo II

Yes. LytArmor is available in multiple series and protection levels for different ballistic threats and applications. Contact Action Bullet Resistant and we can help determine the appropriate LytArmor panel for your project.

Online shipping is available within the contiguous U.S. and Washington, DC. For Alaska, Hawaii, U.S. territories, or international destinations, request a shipping quote or call 800-962-8088.

Delivery charges and applicable taxes are shown during checkout. For compatibility, lead time, or other order questions, contact Action Bullet at 800-962-8088.