Ballistic panels are composite fiberglass sheets that stop bullets and prevent penetration. They are lightweight, fire-rated, and easily concealed behind drywall, millwork, or furniture in secure facilities.
Panels are tested by firing specified calibers at 12" × 12" samples. To pass, they must stop all rounds without penetration or excessive spalling. Levels range from handgun to rifle and shotgun threats.
Yes. Most ballistic fiberglass panels achieve a one-hour ASTM E119 fire rating, providing both bullet resistance and fire protection during emergencies.
Yes. Panels can be hidden behind drywall, desks, judges’ benches, and millwork, providing discreet protection without changing the look of the room.
Panels can be cut with standard saw blades and fastened using drywall screws into wood or metal studs. No special tools are required, making them quick and cost-effective to install.
Ballistic panels typically range from 1/4” to 2” thick, depending on UL 752 protection level. Higher levels require thicker panels for added stopping power.
Panels are manufactured to meet UL 752 Levels 1–8, covering threats from small handguns up to high-powered rifles.
No. Unlike steel plating, fiberglass ballistic panels are non-conductive and allow signals like Wi-Fi and cell service to pass through.
Yes. Panels can be cut and installed during renovations, mounted behind existing drywall or millwork, and integrated with minimal disruption.
Ballistic panels are used in courthouses, schools, banks, police stations, and government buildings—any facility where hidden ballistic protection is required.
Most panels are made of layered fiberglass composites bonded under heat and pressure. This creates a lightweight but extremely strong barrier that absorbs and disperses bullet energy.
Weight depends on the UL 752 level and thickness, but panels generally range from 2.5 to 6 pounds per square foot—much lighter than steel alternatives.
Panels are often manufactured in 4’x8’ or 4’x10’ sheets, but can be cut on-site to fit custom dimensions. Special sizes are available for large projects.
Yes. They can be paired with bullet resistant doors, windows, or transaction systems to create complete protective enclosures.
No ongoing maintenance is required once installed. Unlike steel, fiberglass panels will not rust, corrode, or require repainting.
When properly installed indoors, panels can last for decades without losing ballistic performance. Their fiberglass construction is stable and resistant to environmental damage.
Many panels are made with non-toxic resins and are considered low-VOC. They can also be cut without releasing hazardous dust when proper protective equipment is used.
Yes. Due to their dense fiberglass layers, panels provide added acoustic dampening, which can reduce sound transfer between secure areas and public spaces.
Yes, depending on the UL 752 level specified. Higher levels (UL 4–8) are designed to stop rifle threats such as 7.62mm or 5.56mm rounds.
Panels have a low moisture absorption rate, making them resistant to mold, mildew, and rot when installed in dry, interior applications.
